Cold Stamping · Resin series — Platinum Printing Solutions

01 · Main properties

Offset cold-foil. For sheetfed lines that want the inline finish.

Resin-based release engineered for the sheetfed environment — clean transfer under offset blanket pressure.
Retains fine line, halftone and reverse type at smaller dimensions than flexo cold foil.
Compatible with leading cold-foil systems: KBA ColdFoil, Heidelberg Foilstar, manroland Inline-Foiler.
Wide overprint window — UV offset, conventional offset, UV-flexo and aqueous coatings downstream.
12 µm PET carrier, slit to your unit width with ±0.1 mm tolerance.
Strong cross-direction tear resistance — survives high-speed unwinding without breakage.

02 · Applications

Where it earns its place.

Premium folding cartons — confectionery, fragrance, cosmetics, gifting.
Wine and spirits labels at the high-end of the offset run.
Cigarette and gift packaging where inline finish replaces hot stamp.
Luxury direct-mail and personalised collateral on sheetfed offset.
Magazine covers, brochures and limited editions.

03 · Compatible printing machines

Specified across the major platforms.

KBA Rapida 106 / 145 with ColdFoil unit.
Heidelberg Speedmaster XL 106 / CX 102 with Foilstar.
manroland 700 / 900 with Inline-Foiler Primefoil.
Komori Lithrone GX with K-Supply foil module.

04 · Substrate & parameters

What it lands on, and how to run it.

Figures below are starting points. Our service team will dial it in on your line.

Coated & uncoated paper

UV adhesive · 220 mJ/cm² typical

Folding box board (GC1, GC2, SBS)

UV adhesive · standard cure

Metallised board

Pre-test for adhesion

Self-adhesive labels

UV adhesive · sheetfed only

Press speed

Up to 18,000 sheets/hr

Adhesive

UV cold-foil adhesive · UV-LED compatible blends available

Web tension

Sheetfed — controlled at the foil unit

Overprint

Wet-on-dry recommended; allow full cure before stack

05 · Shades available

8 shades · plus custom match.

8 sheetfed cold-foil bases. Colour comes from the overprint.

Bases8

Adds colour viaOffset inks

Pantone matchVia inks

CR-100Bright silverPMS 877 C

CR-110Matte silverPMS 877 C matt

CR-200Gold basePMS 871 C

CR-210Pale goldPMS 872 C

CR-300PearlPMS 9220 C

CR-400ChampagnePMS 7501 C

CR-500Black mirrorBlack 6 C

CR-600Holographic clearspectrum

06 · Transport & storage

Handle it right, it prints right.

Storage temperature

15 – 25 °C · stable, climate-controlled

Relative humidity

40 – 65% RH · avoid sustained exposure outside range

Shelf life

12 months from manufacture in sealed packaging

Orientation

Store rolls upright on the core; do not stack horizontally

Light

Keep boxed; avoid direct sunlight and high-UV environments

Pre-press conditioning

Acclimatise unopened in pressroom for 24h before first use

07 · Ordering

Cut to your machine, shipped from the nearest office.

Standard widths

50 – 520 mm · cut to your foil-unit width

Standard lengths

1,000 m · 4,000 m (master roll)

Core diameter

3″ or 6″ · per converting line

Lead time

7 working days · cut to width from regional stock

Adhesive compatibility

Pre-test with your adhesive on request

Sample swatches

Free on request · A4 application sheet

Offset cold-foil. For sheetfed lines that want the inline finish.

Where it earns its place.

Specified across the major platforms.

What it lands on, and how to run it.

8 shades · plus custom match.

Handle it right, it prints right.

Cut to your machine, shipped from the nearest office.

Related SKUs.

Cold Stamping · Flexo

Hot · Pigment

OVD Security Foil